Kits lane Ichiro

Ichiro Offset Ultimate Professional 4-Piece Shears Set

At a glance. An Ichiro set with a cutting shear (5.0″, 5.5″, 6.0″, 6.5″ or 7.0″), a thinning shear (6.0″) and a texturizing shear (6.0″), with an offset handle and 440C Steel.

US$419.00

First cutter
Second cutter

Thinner 6.0″ only

Texturizer 6.0″ only

Size help

  • Free standard shipping on orders over US$79.00. Shipping
  • Orders are packed in 1–2 business days and ship from Japan. We ship US orders by FedEx.
  • Change-of-mind returns are only available within 30 days of delivery. Returns

Size help

Ichiro Offset Ultimate Professional 4-Piece Shears Set · 5.0″, 5.5″, 6.0″, 6.5″, 7.0″

What do you do most?

From this model’s sizes

Solid outline: suggested for that work. Maker guidance, as a starting point. Control and hand fit decide.

Check the pair you own

  • Overall length is roughly the inch size. Use a real ruler on the pair you own. Tip to ring end: 15.2 cm is 6.0″. Makers differ on whether the finger rest counts.
  • Blade length, pivot to tip, is the reach you cut with. The maker does not publish a blade length for this model.

Happy with what you use now? Stay with that size. Half an inch shorter gives more control at the tip. Longer gives more reach.

Quick fit check

  • Palm: rest the shear flat on your palm. Tip near your middle finger: that length is worth trying.
  • Rings: they should hold without squeezing. Your thumb should slide out freely. Inserts tighten a loose ring.

What's in this set

  • Thinning shear 6.0″
  • Texturizing shear 6.0″
  • Cutting shear 5.0″
  • Cutting shear 5.0″

Thinner facts

Tooth count is not cut rate. Same tooth count, different results: two thinners with equal teeth can remove very different amounts. You'll see the maker's own figure here. Test on a hidden section first.

Specification

MakerIchiro
ToolSet: cutter + thinner + texturizer
LengthsCutter 5.0″, 5.5″, 6.0″, 6.5″, 7.0″ · Thinner 6.0″ · Texturizer 6.0″
What is this? Lengths

Length: try the shear across your palm, with the blade tip at the end of your middle finger. Read more about lengths

HandleOffset Handle
What is this? Handle

Offset handles drop the thumb ring so your elbow stays lower. Read more about handle

EdgeSlice Cutting Edge (Cutting Shears), V-Shaped Teeth (Thinning Shear), and 16-Tooth Texturizing Edge (Texturizing Shear) · Convex Edge Blade (Cutting Shears), Thinning/Texturizing (Thinning Shear), and Texturizing (Texturizing Shear)
What is this? Edge

A convex edge is curved toward a very fine line and slices smoothly, which suits slide and point cutting. Read more about edge

Steel440C Steel
Hardness58-60HRC
FinishPolished Finish
SKU for this choiceICH-MST4-5050

What it's for

The full Ichiro offset kit in one order: two cutting shears, a blender and a chunky texturizer. It covers cutting, blending and bold texture without a second purchase.

Spec check

  • Cutter one: 5.0", 5.5", 6.0", 6.5" or 7.0"
  • Cutter two: same choice of lengths
  • Thinner: 6.0", V-shaped teeth
  • Texturizer: 6.0", 16 teeth
  • Steel: 440C, 58 to 60 HRC
  • Edge: convex, slice cutting (cutters)
  • Handle: offset on all four
  • Finish: polished

How to choose

All 25 cutter pairings are listed. A common split is one short and one long, say 5.5" for detail and 6.5" for layers, or two of the same length for wet and dry work.

What to compare

The Offset Master set is this kit without the 16-tooth texturizer.

Thinner or texturizer, quick take

The thinner has fine V teeth and is used for soft blending. The texturizer has 16 teeth and suits short, textured shapes.

Pair it up

Ichiro Offset cutter, Offset thinner and 16T texturizer are each listed singly.

Who it suits

Stylists who want two cutters, a thinner and a texturizer in one order.

Upkeep

Brush both toothed shears after each client and oil every pivot daily.

Similar, in stock

Added to your cart